Editors Note:Â This is Part 3 of a multipart series of training points learned from an actual incident. Â Click here for Part 1, and here for Part 2 of article, above is videoÂ of incident. Â Â We start this article with a review and key points to consider.
On August 25, 2014 aÂ worker entered a 3â€™x3â€™ entrance to an approximately 6â€™x6â€™ sump area to retrieve a part number off of a pump when he became overcome by high levels of hydrogen sulfide.Â Another worker (who happened to be his father) noticed him to be in trouble and entered the space and assisted his son out of the well but was then overcome himself and in so many of these situations, a third worker saw the father in trouble and entered to try and help and was overcome and fell on top of the father.Â There was enough sewage water in the sump area to cover almost both bodies. Â Points to consider:
- Always: Rescue or recovery. Be realistic about survivability profile
- On con space calls, it makes sense to establish a hazard group for dealing with the hazmat portion of the incident and set-up a rescue group for dealing with the technical rescue side
- When meters give a reading that is suspicious, conduct some research on why. Use a different meter, research the possibility of cross-sensitivity, or deal with it as if it were there (error on the side of caution)
- Prepare back-up teams in case the first entry team cannot accomplish everything. This is something we always consider with our high heat in the summer
- Be aware of the dangers of H2S, it gives olfactory breakdown and paralysis at levels around 150ppm (anyone working around the entrance had to be in SCBA) It is also very flammable with 4.0 â€“ 44.0 flammable range
- Utilize the Incident Command System – a must to help organize so many very involved tasks.
Just prior to making the first entry we locked out any power issues and after doing that the well began to fill with more water because the pump was shut off. This produced another problem, obviously, and we then called for a vacuum truck to vacuum out the water. Once that was accomplished it was obvious, for the first time, that there were indeed two victims in the well.
Rescuers were dressed in Level â€œBâ€ protective garments with supplied air and were lowered into the space by a tripod, the rescuer placed a pick-off strap around the first victim and the rescuer was then retrieved from the hole and then the victim was winched out with a DBI & tripod. Due to the high heat and members in Level â€œBâ€ PPE the first rescuer needed medical attention and was transported to the hospital. Another member was dressed and continued with the same process.
The victims were heavily saturated with waste, which proved an issue with the medical examiner. They were not comfortable with transporting the bodies with the strong chemical odors that were off-gassing from the victims. We preformed a decon for the victims with a contained decon pool. All members that were around the well and worked with the victims were sent through a technical decon.
Groups and Teams working under a Unified Command
The unfortunate incident involved fire units from Scottsdale, Phoenix, and Tempe and we utilized the incident command systemÂ by assigning members to Hazard Group, Rescue (TRT) Group, Research Team, Decon. Team, Logistics Team and all Groups and Teams working under a Unified CommandÂ of Scottsdale BC602, Phoenix BC2, Police, Medical Examiner, and Utilities.
Risk benefitÂ analysis from the survivability profile was the defining issue on this incident.Â There was no possible chance of survival for the victims. Â Unfortunately if they did not expire from the high levels of H2S, they were also submergedÂ in sewage for as long as 12 minutes before any help could arrive Â – both unsurvivable on their own. Â The low probability of survival shifted the focus to protecting our members for the duration of operation.
HazMatNation welcomes comments, concerns, or personal experiences which may help other first responders.